Our bolt “Super Match” is made of 9310 steel, made more resistant by nitriding and black phosphating treatments that increase surface hardness and corrosion resistance compared to conventional chromium or only phosphating treatments.

Adding material around the pin hole provides greater sturdiness and less breaks.

The teeth are beveled at 45 ° in each edge to improve flowability in sliding operations.

The extractor is made of S7 steel, complete with spring, o-ring and silicone inserts.

If sold jointly to an ADC barrel, the proper headspace is guaranteed.

Weight: 44 gr

Our bolt “Super Competition” is made of 9310 steel, made more resistant by nitriding treatments that increase surface hardness and corrosion resistance compared to common chromium or phosphating treatments.

Adding material around the pin hole provides greater sturdiness and less breaks.

The teeth are beveled at 45 ° in each corner, it differs from the Match version for the particular sloping cut of 5 of them, which further improves fluidity in sliding operations and facilitates insertion into the barrel extension.

The extractor is made of S7 steel, complete with spring, o-ring and silicone inserts.

If sold jointly to an ADC barrel, the proper headspace is guaranteed.

Ideal for sports activities.

Weight: 42 gr

Our “M4” carrier, characterized by MIL-Spec specifications, has been optimized by increasing the scroll guides and thus optimizing contact surfaces, it differs a little from the common AR-15 for the increased back.

The weight is 266 gr with gas key assembled.

Composed of high quality steel, enhanced by specific heat treatments, it is finished with black anti-corrosion and anti-friction phosphatization.

It is aesthetically different from the other similar for its prismatic and non-round shape.

Our “AR-15” carrier, characterized by MIL-Spec specifications, has been optimized by increasing the scroll guides and thus optimizing contact surfaces.

The weight is 248 gr with gas key assembled.

Composed of high quality steel, enhanced by specific heat treatments, it is finished with black anti-corrosion and anti-friction phosphatization.

It is aesthetically different from the other similar for its prismatic and non-round shape.

Our “Heavy ss” carrier has been designed to provide greater stability and alignment under fire, for this purpose the guides have been thickened, as well as the increased back, which have allowed to eliminate shakes within the calcium.

Its heavy weight of 258 gr (with gas key assembled) makes it ideal for use with short barrel carbines, used for tactical activity.

Completely made of stainless steel, it is finished with anti-friction treatments that favor greater fluidity in operation.

The increases give aesthetic strength and roundness.

Our “Mid” carrier, characterized by MIL-Spec specifications, has been optimized by increasing the scroll guides and thus optimizing contact surfaces.

Compared to the “AR-15” standard, it was lightened, not too invasively, by cutting out four side portions to make it practical for both sport and tactical use. The weight is 212 gr with gas key assembled.

Composed of high quality steel, enhanced by specific heat treatments, it is finished with black anti-corrosion and anti-friction phosphatization.

The prismatic shape and side lightening make it easily recognizable.

Our carrier “Light competition” has been designed to be as light as possible, weighing only 182 gr with gas key assembled; it is ideal for sport activities, combined with ADC Adjustable Gas Block it allows the carbine to have a good yield.

Completely made of stainless steel, it is finished with anti-friction treatments that increase the fluidity in operation.

Even the aesthetics have not been neglected, the side and front grooves give a sinuous shape and sense of lightness.