The ADC Custom – CUSTOM Series is aimed at the most demanding and experienced shooter, who wants a rifle specially made according to their needs,
in every detail and component.
ADC offers endless customization solutions, offering the customer an AR15 platform in caliber 223Rem or 300AAC, equipped with Upper and Lower machined from solid with CNC machining, possibility of left charging handle for left-handed shooters and different types of barrels,
from very short in 9.5 “to Lothar Walther – Bull Profile up to 24”.
We offer several optimized configurations in the catalog, which already well cover the needs of high-end shooters,
the possibility of customizing practically every component of the shotgun remains understood, including the coloring with Cerakote © finish.

ELITE

  • CALIBER : 223  / 300AAC
  • LENGHT : 12,5″ – 14,5″ – 16″ –  18″ (Cal.223)  /  12,5″ – 14,5″ (Cal.300AAC)
  • TWIST RATE :  1/9 (Cal.223)  –  1/8 (Cal.300AAC)
  • UPPER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC compatibility and M4 Feed ramps
    Without forward assist

    Charging Handle with Tactical Latch Oversize Ambi

  • LOWER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch Anti rotation trigger pin                                         Made stronger than other similar commercially

  • BARREL: Hammer forged nitrited – Heavy profile – thread: 1/2 X 28 with compensator.
  • GAS SYSTEM: Direct gas impingement with gas block low profile.
  • BOLT CARRIER GROUP: Stainless Steel with QPQ treatment antifriction – black.
  • HANDGUARD: Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – full size barrel.
  • TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
  • STOCK: Tube MIL SPEC collapsible.

ELITE PISTOL

  • CALIBER : 300AAC
  • LENGHT : 9,5″
  • TWIST RATE :  1/8
  • UPPER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC compatibility and M4 Feed ramps
    Without forward assist

    Charging Handle with Tactical Latch Oversize Ambi

  • LOWER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch Anti rotation trigger pin                                         Made stronger than other similar commercially

  • BARREL : Hammer forged nitrited – Heavy profile – thread: 5/8×24 with muzzle brake
  • GAS SYSTEM: Direct gas impingement with gas block low profile.
  • BOLT CARRIER GROUP: Stainless Steel with QPQ treatment antifriction – black.
  • HANDGUARD :Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – full size barrel.
  • TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
  • STOCK: Tube MIL SPEC collapsible.

L.C.S. – Left Charging System –

  • CALIBER : 223  / 300AAC
  • LENGHT : 12,5″ – 14,5″ – 16″ –  18″ (Cal.223)  /  12,5″ – 14,5″ (Cal.300AAC)
  • TWIST RATE :  1/9 (Cal.223)  –  1/8 (Cal.300AAC)
  • UPPER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC compatibility and M4 Feed ramps
    Without forward assist

    Charging Handle with Tactical Latch Oversize Ambi

  • LOWER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch Anti rotation trigger pin                                         Made stronger than other similar commercially

  • BARREL: Hammer forged nitrited – Heavy profile – thread: 1/2 X 28 with compensator.
  • GAS SYSTEM: Direct gas impingement with gas block low profile.
  • BOLT CARRIER GROUP: Stainless Steel with QPQ treatment antifriction – black.
  • HANDGUARD: Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – full size barrel.
  • TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
  • STOCK: Tube MIL SPEC collapsible.

  • Info: Left Charging System, reciprocating steel charging handle, attached to a modified carrier and upper receiver. Facilitates the Charging operation without leaving the line of sight, designed for use both competitive and tactical. Made after careful ergonomic studies and extensive field trials.

L.C.S. PISTOL – Left Charging System –

  • CALIBER : 300AAC
  • LENGHT : 9,5″
  • TWIST RATE :  1/8
  • UPPER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC compatibility and M4 Feed ramps
    Without forward assist

    Charging Handle with Tactical Latch Oversize Ambi

  • LOWER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch Anti rotation trigger pin                                         Made stronger than other similar commercially

  • BARREL : Hammer forged nitrited – Heavy profile – thread: 5/8×24 with muzzle brake
  • GAS SYSTEM: Direct gas impingement with gas block low profile.
  • BOLT CARRIER GROUP: Stainless Steel with QPQ treatment antifriction – black.
  • HANDGUARD :Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – full size barrel.
  • TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
  • STOCK: Tube MIL SPEC collapsible.

  • Info: Left Charging System, reciprocating steel charging handle, attached to a modified carrier and upper receiver. Facilitates the Charging operation without leaving the line of sight, designed for use both competitive and tactical. Made after careful ergonomic studies and extensive field trials.

PRECISION CUSTOM

  • CALIBER: 223
  • LENGHT : 20″ – 22″ – 24″
  • TWIST RATE:  1/9  –  1/8
  • UPPER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC compatibility and M4 Feed ramps
    Without forward assist

    Charging Handle with Tactical Latch Oversize Ambi

  • LOWER: CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch Anti rotation trigger pin                                         Made stronger than other similar commercially

  • BARREL : Lothar Walther – Bull Profile
  • GAS SYSTEM : Diretto con Gas Block low profile .936
  • BOLT CARRIER GROUP:  Stainless Steel with QPQ treatment antifriction – black
  • HANDGUARD: Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – 15,5″.
  • TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
  • STOCK : Fixed

TARGET LR

  • CALIBER: 223
  • LENGHT : 20″ – 22″ – 24″
  • TWIST RATE:  1/9  –  1/8

  • UPPER : CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility and M4 Feed ramps – With high Picatinny

    Without forward assist

    Without Dust cover

    Without charging Handle

    With Right Charging System

    Made stronger than other similar commercially rifle

  • LOWER : CNC Machined from our design billet – AL 7075T6

    Hard black anodized

    MIL SPEC  compatibility

    Enhanced flared/magwell magazine

    Integral trigger guard, great for gloves use

    Ambi selector

    Mag. release oversize

    Ambi bolt catch

    Anti rotation trigger pin

    Made stronger than other similar commercially

  • BARREL : Lothar Walther – Bull Profile
  • GAS SYSTEM : Diretto con Gas Block low profile .936
  • BOLT CARRIER GROUP:  Stainless Steel with QPQ treatment antifriction – black
  • HANDGUARD : CNC machined, free floated round ventilated

    with n.02 slot picatinny adj every 22,5°

    Possibility to regulate the gas block from outside without remove the

    handguard

    Grip Treatment

    4rail in alternative

    Hard black anodized

  • TRIGGER : U.L.T.R.A. – adjustable – 2,5Lb

  • STOCK : Fixed

  • INFO : Right Charging System, reciprocating steel charging handle, attached to a modified carrier and upper receiver. Facilitates the Charging operation without leaving the line of sight, designed for use both accuracy competition and tactical. High Picatinny for use Optics with big lens. Made after careful ergonomic studies and extensive field trials.